Here are the steps to operate a computer:
1. Before plug of powering up the computer system, make sure that the power cable connected to the back panel of the CPU and is plugged into the electric socket.
2. Make sure the video cable is already connected to the video card correctly into the back of the panel
3. Make sure both devices are the mouse and keyboard are mounted on the rear panel to the right. Because if one is installed then the port can not enter. For steps 1 to 3 is basically very easy to do because in addition to the mouse and keyboard devices, other components can only be plugged into the appropriate port in order to prevent novice users from installation errors.
4. When everything is plugged in securely, then press the power button on the CPU is usually located on the front panel of the CPU.
5. The computer will display the Windows logo and displays the desktop image
6. Once the desktop image appears then the computer is ready to operate
7. The proper way to shut down or turn off the computer system is by clicking on the ‘Start’ button and choosing the ‘Turn Off Computer’ option. This will display the options to ‘Standby’, ‘Restart’, or ‘Turn Off’ the CPU.
How To Make Paper Ship
1. 1Take a piece of rectangular paper and place it in front of you so the paper is in portrait format - with the longer edges to the side. Fold it in half lengthwise so the top meets the bottom - with the fold at the "top" of the piece of paper.
2. 2Fold in to half width and unfold - this marks your center line.
3. 3Fold the top right corner down so the top edge lines up with the center line.
4. 4Flip over. Repeat. This should create a "house" like shape with a "big" roof line and about an inch of paper below the triangle of the roof
5. 5Fold bottom edge up. Flip over the paper.
6. 6Fold bottom edge up.
8. 8Grasp the hat shape in the center. Do this at the point where the diagonal creases meet.
9. 9Pull apart the paper and flatten. You should end up with a diamond-shaped piece of paper.
10. 10Fold the bottom edge up. Leave about a 1/4 of an inch (0.65 cm) border between the top edge and the edge of portion that has been folded-up. Once done, flip the paper over.
11. 11Fold the bottom edge to line up with the other side.
12. 12Hold the paper ship in the middle of the bottom edge. Pull it apart and flatten.
13. 13The paper should now be this strange shape.
14. 14Take the left and right triangular portions and pull apart. The bottom edge will flip up on its own.
15. 15Look at your creation: Your paper ship is now complete.
16. 16Finished.
How To Use Blender
Ø Equipment :
- Blender
Ø Steps :
1. Make sure the blender is plugged in, clean, and in working condition
2. Put whatever you want to blend inside of it.
3. Close and hold the cover tightly
4. Press the button that makes it work. Choose an appropriate speed setting depending on what you are blending.
5. Wait until it's blended
6. Open it up, and put it in a cup.
Kamis, 31 Oktober 2013
